Click on the image to check the artwork
By certification 
Traceable Maxi Duct Rodder is an ideal accessory for utilisation with pipe & cable locators, to EXTEND the capability of the locating equipments to identify location & route of buried non metallic ducts or telecom pipes.
The Traceable Maxi Duct rodder is based on a sturdy composite fiberglass rod of 9mm dia with a built in 1mm copper wire that is rigid yet flexible enough to guide into non metallic HDPE ducts, plastic pipes and metal pipes upto lengths of 300 meters / 1000 feet.
The traceable duct rodder is provided in a galvanized metal tube frame with an integral brake and wheels. The base of the traceable rod contains a terminal that provides a connection to the inbuilt copper tracer wire of the duct rodder. The traceable rodder when energized with a frequency excites the full length of the rodder to enable trace the buried pipe.
Use any Digital Pipe & cable locating receiver to trace the route of the Pipe. Available in two length options : 200m/650feet and 300m/1000feet.
You can contact me zhwpa18@hotmail.com
STEP 1 : Insert rod into manhole and push into metallic or non metallic pipe /duct which is to be route traced.
STEP 2 : The terminal box of the PipeTraker provides the connection to the inbuilt copper trace wire of the duct rodder.
STEP 3 : Energise the traceable duct rodder with any frequency such as 8/ 16/33/64 /80 KHz etc using any signal excitor/ transmitter.
STEP 4 : Trace route, depth or blockage points of underground conduit with precision using any digital or analog receiver.
Glass fiber rod diameter(mm) φ8mm/φ9mm/φ10mm/φ11mm/φ12mm/φ13mm/φ14mm/φ16mm
Length(m) 100m-300m
Color Yellow/red/black/blue/green/white
Frame(mm) 1000 x 470 x 1140, 1230 x 470 x 1350
Material 75-80% E-glass fiber +High density polyethylene(outer)
Feature Add metal(copper wire, stainless steel wire)in the rod for detectable purpose
Packing Wrapped and then carton box
Inner coper 1mm or 0.5mm
The Traceable Maxi Duct rodder is based on a sturdy composite fiberglass rod of 9mm dia with a built in 1mm copper wire that is rigid yet flexible enough to guide into non metallic HDPE ducts, plastic pipes and metal pipes upto lengths of 300 meters / 1000 feet.
The traceable duct rodder is provided in a galvanized metal tube frame with an integral brake and wheels. The base of the traceable rod contains a terminal that provides a connection to the inbuilt copper tracer wire of the duct rodder. The traceable rodder when energized with a frequency excites the full length of the rodder to enable trace the buried pipe.
Use any Digital Pipe & cable locating receiver to trace the route of the Pipe. Available in two length options : 200m/650feet and 300m/1000feet.
You can contact me zhwpa18@hotmail.com
STEP 1 : Insert rod into manhole and push into metallic or non metallic pipe /duct which is to be route traced.
STEP 2 : The terminal box of the PipeTraker provides the connection to the inbuilt copper trace wire of the duct rodder.
STEP 3 : Energise the traceable duct rodder with any frequency such as 8/ 16/33/64 /80 KHz etc using any signal excitor/ transmitter.
STEP 4 : Trace route, depth or blockage points of underground conduit with precision using any digital or analog receiver.
Glass fiber rod diameter(mm) φ8mm/φ9mm/φ10mm/φ11mm/φ12mm/φ13mm/φ14mm/φ16mm
Length(m) 100m-300m
Color Yellow/red/black/blue/green/white
Frame(mm) 1000 x 470 x 1140, 1230 x 470 x 1350
Material 75-80% E-glass fiber +High density polyethylene(outer)
Feature Add metal(copper wire, stainless steel wire)in the rod for detectable purpose
Packing Wrapped and then carton box
Inner coper 1mm or 0.5mm
