Click on the image to check the artwork
By certification 
Pom mold: This set of molds is a set of gear injection molds. Talk about the characteristics of POM rubber 1. POM has a very low coefficient of friction and good geometric stability, especially suitable for making gears and bearings
2. POM has high temperature resistance, so it is also used in pipeline devices (pipe valves, pump housings), lawn equipment, etc.
3. POM is a tough and elastic material, which has good creep resistance, geometric stability and impact resistance even at low temperatures.
4. The high degree of crystallinity of POM leads to a very high shrinkage rate, which can be as high as 2%~3.5%. There are different shrinkage rates for a variety of different reinforced materials.
5. POM is a crystalline plastic with obvious melting point. Once it reaches the melting point, the melt viscosity drops rapidly.
Specific gravity 1.43, melting point 175°C, tensile strength (yield) 70MPa, elongation (yield) 15%, (break) 15%, impact strength (unnotched) 108KJ/m2, (notched) 7.6KJ/㎡. If your company needs POM molds, please contact us: qxwmould_co_ltd@163.com
Mould Name: Custom Plastic Mould
Part Material: POM
Product Size: 19.81X408.4X19.95 mm
Product Description: POM reel products
Mould Cavity: 2 cavities
Mould Size: 300*1100*415 MM
Mould Cavity Steel: 1.2344(HRC48-52)
Mould Injection System: Hot runnertip injection
Mould Ejection System: ejector pin
Mould Cycle Time: 80s
Mould Life Cycle: 500,000
Lead Time: 50 working days
Mold export to: Europe
http://www.qxw-mold.com/
